-40%
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI
50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI

50 Pem Self Clinching Female Standoff M3.5 x .6 Blind Threads x 12 BSO-M3.5-12ZI

$ 6.85

Availability: 39 in stock

Description

4162SD5G.17
New Pem (By Penn Engineering) Self Clinching Blind Female Standoffs, M3.5 x .6 Threads x 12 MM Long, Zinc Plated Hardened Steel, Part Number BSO-M3.5-12ZI.  Each bid quantity is for a Lot of Fifty (50) Standoffs.  You may bid / buy any number of lots, up to the total quantity available above.
These were purchased at an electronics wholesale company liquidation earlier this year, and they were brand new in the original bulk factory bags.  We packaged them in heavy Ziplok bags for resale.
According to the calipers
:
Overall length:  .471" / 11.97 MM
Length (underside of hex to tip):  .453" / 11.51 MM
Hex size:  .246" / 6.26 MM
Diameter:  .207" / 5.26 MM
Threads:  M3.5 x .6 (diameter - threads per mm)
According to the manufacturer
:
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.  Outer sheet surfaces are not only flush, but closed as well.
Specifications
Thread Size x Pitch: M3.5 x 0.6
Thread Code: M3.5
Length Code: 12
Min. Sheet Thickness: 1 mm
Hole Size in Sheet + 0.08: 5.41 mm
Min. Dist. Hole C/L to Edge: 6.8 mm
For Use in Sheet Hardness 1*: HRB 80 / HB 150 or less
Thread Specification: Internal, ANSI/ASME B1.13M, 6H
Fastener Material: Heat-Treated Carbon Steel
Standard Finish: Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
*1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.