Decorative Metal Shelf Brackets - Handmade in the USA

Description

Raw Steel Shelf  Brackets
Handmade in the USA
These brackets are crafted in our small shop in Wisconsin.We proudly make them on American made equipment and from American made steel!
This listing is for one bracket, please be sure to select the correct quantity that you wish to order.
Brackets are made from 1 1/2" x 3/16" steel. Sharp edges have been removed.Mounting holes have been deburred.
You can choose to receive your brackets in unfinished raw metal or have them finished in a durable clear coat enamel finish. This finish protects the bracket from oxidizing as well as preserving the raw metal/rustic appearance.
The amount of weight your shelf brackets will hold depends on the quality of the installation. Your shelf brackets will always be strongest when attached directly to wall studs. If you have any questions regarding installation or how much weight your shelves can hold, please contact a qualified contractor.
-Please be sure to order in the depth that is the closest to your actual shelf size without going under. Also remember that todays conventional lumber is measured in nominal size.
Examples-
A modern 2" x 4" board will actually measure 1.5" x 3.5" this would require 3.5" brackets.
A modern 2" x 6" board will actually measure 1.5" x 5.5" this would require 5.5" brackets.
A modern 2" x 8" board will actually measure 1.5" x 7.25" this would require 7.25" brackets.
A modern 2" x 10" board will actually measure 1.5" x 9.25" this would require 9.25" brackets.
A modern 2" x 12" board will actually measure 1.5" x11.25" this would require 11.25" brackets.
All of our brackets are made slightly over the listed measurement to allow for small variations in the flatness of the wall and the shelf.
We recommend two brackets for 36" and under shelves.
Three brackets for 36" to 66" shelves
Four brackets for 67" to 96" shelves