National Lighting 40W LED Magnetic Transformer Class 2 24VDC 60Hz LEDTF-24-40W

Description

Fruit Ridge Tools, LLC
Our eBay Store
Contact Us
Add to Favorite Sellers
National Lighting 40W LED Magnetic Transformer Class 2 24VDC 60Hz LEDTF-24-40W
Each is individually packaged; packaging may differ from photos. Features include:
Hardwired
Control with a standard magnetic, wall mounted dimmer switch
24V output voltage
CSA listed
UL standard 5085-1
Length: 5 1/16" (128mm)
Width: 2 1/8" (54mm)
Height: 2" (51mm)
It is important to use a Dimmer Switch that is rated for use with CFL/LED lights
If using a dimmer switch, there is no minimum load requirement for the power supply. If using a standard switch (On/Off), the load must be greater than 50% of the capacity of the driver
To connect the LED lights to the power supply, you can plug the lights into a distribution block first and then hardwire the distribution block to the power supply. You can also hardwire the lights directly to the power supply
You can also plug multiple distribution blocks into each other in order to accommodate more lights. Just be sure not to exceed the maximum wattage of each distribution (s) block (30w total on each leg). This is especially important when running ribbon lighting as the wattage of a run is often more than 30w
In the power supply are 4 wires: Red, Blue, White, and Black. The White and Black wires are for your incoming 110v power, and the Red and Blue wires are to connect to your LED lights. The Red is positive, and the Blue is Negative on the low voltage side. The Black is hot and the White is common on the 110v side. For the Loox LED wires that are attaching, the solid black wire is positive, and the wire with white hash marks is negative
This is New Old Stock and is returnable for any reason. (SKU # NLGLEDTF-24-40W-EA; Weight: 2.55 lbs.)