-40%

Roll of Gaskets Adhesive for Kitchen And Bathroom Bath

$ 7.09

Availability: 80 in stock
  • Packaging/packaging: Roll
  • Type: Insulating tape
  • Adapted to: tiled surface, Bathtube, shower tray, sink
  • Quantity by pack: 1
  • Brand: Shop-Story
  • Material: Plastic, Silicone
  • Features: Heavy duty at the water
  • Minimum thermal resistance (R-Factor): 120 degrees
  • Condition: New
  • MPN: Sealing Strip
  • Width-: 2.2cm
  • Color: White

    Description

    Roll of adhesive joints
    For kitchen and bathroom
    The easiest waterproof tape to install
    THE
    sanitary seals
    remain THE solution for
    good seal
    elements of
    kitchen
    and some
    bathroom
    . However, if they are poorly done, water will seep in and cause a water leak, which is when mold can appear.
    The use of household products can also damage them and alter their waterproofness. Their degradation is even more rapid in the kitchen where they are subjected to splashes of grease, on which dirt accumulates. These then require regular cleaning which ends up damaging and crumbling them. For better hygiene it is inevitable to change them.
    THE
    sealing tape
    , made of plastic, is very easy to maintain. It is perfectly resistant over time to water, mold and household products used in the
    bathroom
    and the
    kitchen
    .
    Available in 3 colors and 2 sizes, it adapts to all your installations.
    A clean and aesthetic result
    It is often difficult to make a
    silicone seal
    perfectly smooth and regular between a water point (
    bathtub
    ,
    shower tray
    , sink…), and a
    workplan
    or a
    tiled surface
    . This
    roll seal
    , provides a practical solution for sealing surfaces in just a few minutes, without getting your hands dirty or damaging your walls, and obtaining a perfectly smooth and aesthetic result.
    Presented in
    ribbon shape
    , made of flexible plastic, ensures optimal adhesion to surfaces. Its powerful adhesive strip provides a perfect seal, eliminating the risk of water infiltration.
    Thanks to its preformed angle, the
    ribbon
    is ready to use, extremely quick to apply and requires only a pair of scissors or a cutter to apply.
    For optimal adhesion, it is recommended to first remove the old seal and properly clean the surface to be protected. You must then measure the surface to be protected and cut the necessary length of tape. Then, simply remove the protective film and press the seal firmly onto the surface. For a
    easy application, the finger follows the joint perfectly in the hollow of its rounded shape. Finally, for
    neat and discreet connections in the corners
    , cut the ribbon at 45°.
    The joint perfectly matches the surface, corners and corners, and provides a neat, straight and clean finish.
    After applying the preformed joint,
    a waiting period of 8 hours must be respected before using the water point
    .
    The use of household products can also damage them and alter their waterproofness. Their degradation is even more rapid in the kitchen where they are subjected to splashes of grease, on which dirt accumulates. These then require regular cleaning which ends up damaging and crumbling them. For better hygiene it is inevitable to change them. It is often difficult to make a silicone seal perfectly smooth and regular between a water point (bathtub, shower tray, sink…), and a workplan or a tiled surface. This roll seal, provides a practical solution for sealing surfaces in just a few minutes, without getting your hands dirty or damaging your walls, and obtaining a perfectly smooth and aesthetic result. For optimal adhesion, it is recommended to first remove the old seal and properly clean the su
    The use of household products can also damage them and alter their waterproofness. Their degradation is even more rapid in the kitchen where they are subjected to splashes of grease, on which dirt accumulates. These then require regular cleaning which ends up damaging and crumbling them. For better hygiene it is inevitable to change them. It is often difficult to make a silicone seal perfectly smooth and regular between a water point (bathtub, shower tray, sink…), and a workplan or a tiled surface. This roll seal, provides a practical solution for sealing surfaces in just a few minutes, without getting your hands dirty or damaging your walls, and obtaining a perfectly smooth and aesthetic result. For optimal adhesion, it is recommended to first remove the old seal and properly clean the su